As a widely used equipment for solid-liquid separation, the operation stability and processing effect of filter presses are crucial for many industries. As one of the important components of the filter press, the normal operation of the feed pump has a significant impact on the performance of the filter press. In practice, sometimes the feed pump will not feed the situation, which will seriously affect the processing efficiency of the filter press. This article will discuss the reasons why the feed pump of the filter press does not feed, to help users better understand and solve this problem.

First, the filter press feed pump does not feed the reason analysis

1. Improper pump selection: When selecting a pump, if the flow rate and head do not match the actual demand, the pump may not be able to draw in the material properly. For example, when the flow rate of the pump is too small or the head is too high, the pump may not be able to overcome the gravity of the material or the resistance of the pipeline, so that the material can not be sucked in.

2. Piping design and installation problems: unreasonable piping design or improper installation may lead to fluid flow obstruction in the pipeline, thus affecting the normal suction of the pump. For example, the pipeline elbows, valves and reducers and other components of the configuration is not appropriate, may lead to fluid in the pipeline vortex, uneven velocity distribution and other issues, increasing fluid resistance, affecting the performance of the pump.

3. Problems with material characteristics: The viscosity, density, solid content and other characteristics of the material may affect the suction performance of the pump. High viscosity, high density or high solid content of the material may lead to an increase in the resistance of the pump suction port, thus making it difficult for the pump to suck in the material.

4. Improper Operation and Maintenance: Incorrect operating practices or lack of proper maintenance may cause the pump to fail to draw material properly. For example, incorrect sequence of operation, inappropriate operating parameters or lack of timely maintenance checks may affect the performance and reliability of the pump.

5. Mechanical failures: Mechanical failures within the pump may result in the pump not being able to draw material properly. For example, wear and tear of the impeller, damage to seals or failure of transmission components may affect the normal operation of the pump.

6. Electrical problems: Electrical problems associated with the pump may cause the pump to fail to start or operate properly, thus affecting the pump's suction performance. For example, a power supply failure, motor failure, or control system failure may affect the normal operation of the pump.

Second, to solve the filter press feed pump does not feed the method

1. Reasonable selection: choose the appropriate pump type according to the actual demand, to ensure that the flow rate and head and other parameters match the actual demand. In the selection of pumps, should fully consider the material characteristics, pipeline resistance and other factors to ensure that the selected pump can meet the actual demand.

2. Optimise piping design and installation: Reasonable configuration of elbows, valves, reducers and other components in the piping system to reduce fluid resistance and ensure smooth fluid flow in the pipeline. The installation quality of the piping system should be ensured to avoid leakage, misalignment and other problems.

3. Adjustment of operating parameters and maintenance plan: Adjust the operating parameters and maintenance plan according to the actual situation to ensure the normal operation of the pump. For example, reasonable setting of pump operating pressure, flow and other parameters, regular maintenance and inspection, timely replacement of worn parts, etc..

4. Checking and eliminating mechanical faults: Regular mechanical inspection and maintenance of the pump, timely detection and resolution of mechanical faults. Damaged or badly worn parts should be replaced in time. The inside of the pump should be kept clean to avoid the accumulation of impurities.

5. Inspection of the electrical system: Regularly inspect the electrical system associated with the pump to ensure that components such as the power supply, motor and control system are functioning properly. Faulty electrical components should be repaired or replaced in a timely manner.

6. Training of operators: Strengthen the training and education of operators to improve their operation and maintenance skills of pumps. Through regular training and assessment, ensure that operators can master the operation and maintenance skills of the pump to avoid failures and problems caused by improper operation.

7. Establishment of contingency plans for failures: Develop contingency plans for failures such as pumps not feeding, so that effective measures can be taken quickly to solve problems when failures occur. The contingency plan should include troubleshooting, maintenance and restoration to ensure a quick return to normal operation.

8. Adoption of intelligent monitoring and diagnostic technology: the use of modern intelligent monitoring and diagnostic technology to carry out real-time monitoring and recording and analysis of the operating status of the pump. Through intelligent monitoring and diagnostic systems, potential problems and fault trends can be detected in a timely manner to prevent problems such as pumps not feeding. These technologies can also provide the basis for fault diagnosis and localisation, helping to quickly find the problem and take appropriate measures to solve it.

9. Regular performance tests and assessments: Regular performance tests and assessments of pumps are conducted to ensure their proper operation and reliability. Potential performance problems and technical defects can be identified through testing and evaluation, and corresponding improvement measures can be taken in time for repair and optimisation. The results of these tests and assessments can also provide a reference basis for subsequent maintenance and overhaul.

10. Enhance cooperation and communication with suppliers: Maintain good cooperation and communication with suppliers to provide timely feedback on problems and technical support. Suppliers can provide expertise and experience in the design, manufacture and use of pumps to help users better understand and maintain the performance and service life of the pump. Co-operation and communication with suppliers also help to establish a long-term stable relationship, and jointly solve the problems and challenges encountered in the use of the process.

Filter press feed pump does not feed the reason is more